Size: φ 20 mm, φ26 mm, φ28mm, φ32mm CustomizableMaterial: Aluminum/ Aluminum and plasticCoat: Sterilization about 30min under 121±2C, aluminum surface will not change color, and will not crack
Processing material: stainless steel iron 45# steel copper etc.Maximum diameter: can be customizedTolerance: can be customizedMachining type: MillingProcessing cycle: 8-15 days
Size: φ 20 mm, φ26 mm, φ28mm, φ32mm CustomizableMaterial: Aluminum/ Aluminum and plasticCoat: Sterilization about 30min under 121±2C, aluminum surface will not change color, and will not crack
DAS is a special double action piston compact seal, which consists of an NBR seal ring, two back up rings and two guide rings. Supply Ability: 100000 Piece/Pieces per monthWelcome your enquiry.
The HUB Blue Switch Mechanical Keyboard comes with special design with full color illumination and strong construction. The type of key switches is customized based on your convenience.
The rounded end is designed for round stainless steel handrails with a diameter of 42.4 millimeters and a thickness of 2 millimeters. You can also use it with a solid wooden handrail 42 millimeters in diameter, using a stainless steel fitting for wood.
Description The models with weight 9g are standard rc servo motors such as DS919MG, DS929MG, DS939MG, DS919HV, DS929HV, DS939HV. These models have common specification below. Size:22.5X11.5X24.6mm(0.88x0.45x0.96) Weight:12.5g/0.44 oz Operating Voltage:4.8
To obtain a reliable and huge tightening force, it is necessary to ensure that the clamp ring fixed on the gecko is fully expanded. And the expansion clamp must not fall off the rod or twist or deform in the hole.
This Garnet Abrasive uses high quality iron aluminum alloy as raw material, mechanically processed and produced after water, magnetic and shielding. Garnet has self-sharpness, moderate hardness, good toughness, sharp edges, low loss and long service life.
Production Introduction This Resin-bonded metal cutting wheel 4"× 3/32"× 5/8"(105x2.5X16mm) is made of high quality Aluminum Oxide abrasive material with two or four fiberglass protection for metal steel cutting.
To obtain a reliable and huge tightening force, it is necessary to ensure that the clamp ring fixed on the gecko is fully expanded. And the expansion clamp must not fall off the rod or twist or deform in the hole.
35mm width ball bearing drawer slides are saying the height of the sliders is 35mm(1.38”) with 75lb. load capacity, widely used as light-duty lowrider solution. Built with a standard full extension and convenient narrow side-space.